info@caitek.com            +2 (02) 238 242 80           +2 (0122) 00 555 91

Addressable Detectors

 

  HD201 - Addressable Photoelectric Smoke Detector
  • Operating Voltage: 15 to 28 VDC
  • Standby Current: 400μA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
  • Maximum Alarm Current (LED on): 7 mA @ 24 VDC
  • Diameter: 4.0 ̋ (103 mm)
  • Weight: 5.5 oz. (155 g)
  • Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
  • Operating Temperature Range: -10°C to 50°C

The sensors transmit an analog representation of smoke density over a communication line to a control panel. Inside MCU’s EEPROM keep the sensor’s address that can be set by a portable Address setting device. Two LEDs on the sensor are controlled by the panel to indicate sensor status. The detector require compatible addressable communications to function properly. Connect these sensors to listed-compatible control panels only..


  HD202 - Addressable Heat Detector
  • Operating Voltage: 15 to 28 VDC
  • Height: 2.2 ̋ (55 mm) installed in Base
  • Standby Current: 400μA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
  • Maximum Alarm Current (LED on): 7 mA @ 24 VDC
  • Diameter: 4.0 ̋ (103 mm)
  • Weight: 5.5 oz. (155 g)
  • Operating Temperature Range: -10°C to 50°C
  • Operating Humidity Range: 10% to 93% Relative Humidity Non-condensing

These sensors are designed to provide open area protection with 50 foot spacing capability. The detector is a rate-of-rise temperature sensor with 135°F fixed temperature alarm. Inside MCU’s EEPROM keep the sensor’s address that can be set by a portable Address setting device. Two LEDs on each sensor light to provide 360° visibility of the sensor indication. The LEDs can be latched ON by code command from the panel for an alarm indication. The detector requires compatible addressable communications to function properly. Connect these sensors to listed-compatible control panels only.


  HD203 - Addressable Photoelectric Smoke& Heat Detector
  • Operating Voltage 15 to 28 VDC
  • Standby Current: 400μA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
  • Maximum Alarm Current (LED on: ) 7 mA @ 24 VDC
  • Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
  • Operating Temperature Range: -10°C to 50°C

The detector is plug-in type photoelectronic smoke and heat sensors with addressable analog communications. The sensors transmit an analog representation of smoke density or temperature over a communication line to a control panel. Inside MCU’s EEPROM keep the sensor’s address that can be set by a portable Address setting device. Two LEDs on the sensor are controlled by the panel to indicate sensor status. The detector require compatible addressable communications to function properly. Connect these sensors to listed-compatible control panels only.

Fire Alarm / Fighting