info@caitek.com            +2 (02) 238 242 80           +2 (0122) 00 555 91

Addressable Mini Detectors

 

  HD201-mini    Mini Addressable Smoke DetectorOperating Voltage: 9 to 28 VDC Volts Non-polarized
  • Operating Voltage: 15 to 28 VDC
  • Standby Current: 650μA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
  • Maximum Alarm Current (LED on): 5 mA @ 24 VDC
  • Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
  • Operating Temperature Range: -10°C to 50°C
  • Smoke Sensitivity: 0.15-0.30dB/m.

The detector is plug-in type photoelectronic smoke sensors with addressable analog communications. The sensors transmit an analog representation of smoke density or temperature over a communication line to a control panel. Inside MCU’s EEPROM keep the sensor’s address that can be set by a portable Address setting device. Two LEDs on the sensor are controlled by the panel to indicate sensor status. The detector require compatible addressable communications to function properly. Connect these sensors to listed-compatible control panels only.


  HD202-mini    Mini Addressable Heat Detector
  • Voltage Range: 15 to 28 Volts DC Peak
  • Standby Current: 650 μA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
  • LED Current: 5 mA @ 24 VDC
  • Installation Temperatures: -10°C to50°C
  • Operating Humidity Range: 10% to 93% Relative Humidity Non-condensing

The detector is intelligent sensors that utilize a state- of-the-art thermistor sensing circuit for fast response. These sensors are designed to provide open area protection with 50 foot spacing capability. The detector is a rate-of-rise temperature sensor with 135°F fixed temperature alarm. Inside MCU’s EEPROM keep the sensor’s address that can be set by a portable Address setting device. Two LEDs on each sensor light to provide 360° visibility of the sensor indication. The LEDs can be latched ON by code command from the panel for an alarm indication. The LEDs can also be unlatched to the normal condition by code command. The detector requires compatible addressable communications to function properly. Connect these sensors to listed-compatible control panels only.


  HD203-mini    Mini Addressable Smoke & Heat Detector
  • Operating Voltage: 15 to 28 VDC
  • Standby Current: 650μA @ 24 VDC (one communication every 5 seconds with LED blink enabled)
  • Maximum Alarm Current (LED on: ) 5 mA @ 24 VDC
  • Operating Humidity Range: 10% to 93% Relative Humidity, Non-condensing
  • Operating Temperature Range: -10°C to 50°C

The detector is plug-in type photoelectronic smoke and heat sensors with addressable analog communications. The sensors transmit an analog representation of smoke density or temperature over a communication line to a control panel. Inside MCU’s EEPROM keep the sensor’s address that can be set by a portable Address setting device. Two LEDs on the sensor are controlled by the panel to indicate sensor status. The detector require compatible addressable communications to function properly. Connect these sensors to listed-compatible control panels only.


     

 

Fire Alarm / Fighting