info@caitek.com            +2 (02) 238 242 80           +2 (0122) 00 555 91

Sensor Flood with Cable

Product # RMA-F008-SEN  (2.5 m)
Product # RMA-F024-SEN  (7.5 m)
Product # RMA-F050-SEN  (15 m)

Flood Sensor with attached 8' sensor cable is activated by liquid (i.e. water, fluid, etc.) making contact with the attached Flood Sensor Cable of any length. The Flood Sensor Cable can detect as little water as a single drop.

Once liquid is detected the Flood Sensor triggers an alarm condition allowing the Room Alert hardware, Device ManageR software and/or other monitoring application to send out alerts and/or take automatic corrective action.

This is an instant 'Plug & Play' sensor via one of the switch sensor channels on the back of any compatible Room Alert ID box. The Flood Sensor Cable can be extended by adding one or more 2.5m Flood Sensor Cable Extensions (sold separately). Cable distance can be extended from the standard 7.5m to approximately 275m by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable in order to place Flood Sensor and attached sensor cable away from Room Alert unit, on a different floor, above a drop ceiling or under a raised flood.



Specifications

 Environment Condition Monitored  Water/Flood
 Real-Time Recognition  Water/Flood
 Power Supply  5VDC 1A Adapter
 Flood Sensor Cable Length  7.5 m / 2.5 m
 Expandable Cable Length  2.5 Lengths via AVTECH's 8' Flood Cable Extender(s)
 Sensor Cable Type  2 Wire Sensor Cable 
Sensor Cable Length   7.5 m / 2.5 m
 Maximum Sensor Cable Length  Approximately 275
 Compatible Products  Room Alert 32W, 32E, 26W, 26WO, 24E, 12E, 11E, 7E, 4E & 3E