+2 (02) 238 242 80           +2 (0122) 00 555 91

Accessories - Light Tower w/Audio

Product # ST-RYG-LT (4E ONLY)
Product # ST-RYG-LT/A (32W/E, 12E, 3E)

Light Tower w/Audio is designed to enhance the alerting capabilities of the Room Alert 32W, 32E, 4E or 3E monitors to include visual and audible alerting when an issue or event occurs.

The visual lights and audio alarms can also be turned on or off automatically or manually via the Room Alert web interface, AVTECH's Device ManageR software and SNMP Trap or SNMP Set commands. Any Room Alert or camera on the network can enable or disable the lights or audio. The light tower does not need to be directly attached to that unit. This capability allows the Light Towers to be mounted in any location where the lights are highly visible and trigger from across the network. Lights can be activated by alarms detected by sensors connected or by other devices remotely across the network.

 The Light Tower w/Audio is connected to the Room Alert 4E via the Light Tower Connection Port on the back of the Room Alert 4E monitor. Room Alert 32W, 32E and 3E monitors require a Light Tower & Relay Adapter (which includes a Relay Switch) in order to connect the Light Tower. The Light Tower w/Audio has an adjustable audio alarm with an intensity range of 0 dB to 95 dB (at 1m). It can be adjusted by simply unscrewing the cover or removing the center plug. The Light Tower w/Audio comes standard with a 15' cable that connects via easy 'twist & click' connectors. It can be extended to just over 100' with 25´ Light Tower w/Audio Extension Cable ONLY.


 External Light Tower  Yes, Red-Yellow-Green w/Audio
 Oscillation Frequency 2.7 KHz +/- 50Hz (Max Intensity 95 dB @ 1m) 
Adjustable Audio  Yes 
Mounting Bracket  Yes, Compatible w/1U Rack, Wall or Other 
 Sensor Cable Type AVTECH Custom Cable 
 Sensor Cable Length  15' (Light Tower w/Audio Extension Cable Available)
 Maximum Sensor Cable Length  Approximately 30 m
Compatible Products   Room Alert 32W, 32E, Signal Tower Externals & 4E