• +2 (02) 23824280
  • +2 0122 00 555 91
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Room Entry Sensor


Room Entry Sensor provides real-time recognition of a door or cabinet being open. Standard use is to mount the wired sensor to the frame of a door. Then, mount the matching actuator opposite of the sensor on the door itself. When the door opens, the two components separate and the sensor trips.

Product # RMA-RE1-SEN

Image
Each Door Entry Sensor provides real-time recognition of a door or cabinet being open. Standard use is to mount the wired sensor to the frame of a door. Then, mount the matching actuator opposite of the sensor on the door itself. When the door opens, the two components separate and the sensor trips.

This is an instant 'Plug & Play' door entry alert sensor via one of the switch sensor channels on the back of any compatible Room Alert ID box. Cable distance can be extended from the standard 7.5 meters to approximately 275 meters by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable.

Specifications

Environment Condition Monitored   Room Entry
Real-Time Recognition   Door/Cabinet Open/Closed
 Power Supply  Monitoring Unit 
 Sensor Cable Type  2 Wire Sensor Cable
 Sensor Cable Length  7.5 m
 Maximum Sensor Cable Length  Approximately 275 m
Compatible Products  Room Alert 32W, 32E, 12E, 11E, 7E, 4E & 3E 

Contact

+2 (02) 23824280  (Phone/FAX)
+2 012 200 555 91 (Mobile)
+2 012 200 555 71 (Whatsapp)
info@caitek.com     (Email)

Support

+2 012 200 555 91    (Mobile)
support@caitek.com    (Email)
Support Center           (Portal)
Knowledge Base (Documents)

Image
Image
Image
© 2024 CAITEK Information Systems. All Rights Reserved.