• +2 (02) 23824280
  • +2 0122 00 555 91
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Water Tank Level


Water Tank Level Sensor monitors the rise and fall of water in a container (i.e. typically a large tank). The float and control weight are composed of chemically-resistant polypropylene; the 16' cable is coated with rugged PVC. Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels... both high and low. 

Dimensions of the float switch are 5.1" H x 3.0" W. The control weight is 4" H x 2.25" W. The 16' attached cable with PVC coating has a protection rating of IP67 and NEMA 6. The switch state differential range is a minimum of 10" and a maximum of 50". Please see the Installation Note for more information.

Product # RMA-WTL1-SEN   (NC)
Product # RMA-WTL2-SEN   (NO)

Image
Water Tank Level 1 Sensor (NC) monitors the rise and fall of water in a container (i.e. typically a large tank). The float and control weight are composed of chemically-resistant polypropylene; the 16' cable is coated with rugged PVC. Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels... both high and low. 

Dimensions of the float switch are 5.1" H x 3.0" W. The control weight is 4" H x 2.25" W. The 16' attached cable with PVC coating has a protection rating of IP67 and NEMA 6. The switch state differential range is a minimum of 10" and a maximum of 50". Please see the Installation Note for more information.

Contact

+2 (02) 23824280  (Phone/FAX)
+2 012 200 555 91 (Mobile)
+2 012 200 555 71 (Whatsapp)
info@caitek.com     (Email)

Support

+2 012 200 555 91    (Mobile)
support@caitek.com    (Email)
Support Center           (Portal)
Knowledge Base (Documents)

Image
Image
Image
© 2024 CAITEK Information Systems. All Rights Reserved.